Fagor 8055i FL EN, Operating Manual

Page: 38 / 160

·38·
Operating manual
CNC 8055
CNC 8055i
2.
O
PERATING
IN JO
G MODE
·MC· O
PTION
S
OFT
: V02.2
X
Introductio
n
2.1.4 Selecting a program for simulation or execution
When selecting a part-program or operation saved as part of a part-program for simulation or
execution, the CNC selects that part-program and shows it highlighted next to the green "start"
symbol in the top center window.
When the top center window shows the part-program selected next to the green "start" symbol, the
CNC acts as follows:
• If [START] is pressed, the CNC executes the part-program that is selected.
• If [CLEAR] is pressed, the CNC de-selects the part-program and removes it from the top center
window.