Fagor 8055i FL EN, Operating Manual

Page: 83 / 160

Operating manual
CNC 8055
CNC 8055i
WORKING
WITH OPERATIONS OR
CYCLES
3.
·MC· O
PTION
S
OFT
: V02.2
X
·83·
Surface
mill
ing
an
d
slot mil
ling
o
peratio
ns
3.4 Surface milling and slot milling operations
Surface milling operation.
The following data must be defined:
• The type of surface milling, the starting point (X1, Y1), the dimensions of the surface milling (L,
H, E,

) and the machining conditions in Z (Zs, Z, P, I, Fz).
• Also, you must define the milling pass (

) in the data area for the roughing operation and the
finishing stock (

z) in the data area for the finishing operation.
Grooving operation.
The following data must be defined:
• The type of slot milling, the starting point (X1, Y1), the dimensions of the slot (L, H, E,

) and
the machining conditions in Z (Zs, Z, P, I, Fz).
This key accesses the surface milling and slot milling operations.
• In the roughing area, define the milling pass (

) and the machining direction.
• In the finishing area, define the finishing stocks (

and

z), the number of finishing
passes and the machining direction.