Fagor 8055i FL EN, Operating Manual

Page: 122 / 160

·122·
Operating manual
CNC 8055
CNC 8055i
3.
WORKING
WITH OPERATIONS OR
CYCLES
·MC· O
PTION
S
OFT
: V02.2
X
Multip
le positio
nin
g
3.13.3 Multiple positioning in an arc
Multiple positioning in an arc (level 1).
This key associates this positioning with the active operation.
The positioning may be defined in 6 ways. To select the desired type, place the cursor
over the icon and press the two-color key. The icon shows the selected option and the
total number of options available.
1) Coordinates of the starting point (X1, Y1)
Center coordinates (Xc, Yc)
Angle of the last point (

)
Angular distance between machining operations (

)
2) Coordinates of the starting point (X1, Y1)
Radius (R)
Angle of the starting point (

)
Angle of the last point (

)
Angular distance between machining operations (

)
3) Coordinates of the starting point (X1, Y1)
Center coordinates (Xc, Yc)
Number of points to machine (N)
Angle of the last point (

)
4) Coordinates of the starting point (X1, Y1)
Center coordinates (Xc, Yc)
Number of points to machine (N)
Angular distance between machining operations (

)
5) Coordinates of the starting point (X1, Y1)
Radius (R)
Angle of the starting point (

)
Number of points to machine (N)
Angle of the last point (

)
6) Coordinates of the starting point (X1, Y1)
Radius (R)
Angle of the starting point (

)
Number of points to machine (N)
Angular distance between machining operations (

)