Fagor 8055i FL EN, Operating Manual

Page: 121 / 160

Operating manual
CNC 8055
CNC 8055i
WORKING
WITH OPERATIONS OR
CYCLES
3.
·MC· O
PTION
S
OFT
: V02.2
X
·121·
Multip
le positio
nin
g
3.13.2 Multiple positioning in a straight line
Data definition.
The coordinates are defined one by one. After placing the cursor on the coordinates of the axes to
be defined, the value is entered in one of the following ways.
• Entering the value manually. Key in the desired value and press [ENTER].
• Assign the current machine position.
Jog the axis with the handwheel or the JOG keys up to the desired point. Press [RECALL] so
the selected data assumes the value shown in the top right window and press [ENTER].
The top right window shows the tool position at all times.
To define the rest of the values (I, N,

, L), go to the corresponding window, key in the desired value
and press [ENTER].
This key associates this positioning with the active operation.
The positioning may be defined in 5 ways. To select the desired type, place the cursor
over the icon and press the two-color key. The icon shows the selected option and the
total number of options available.
1) Coordinates of the starting point. (X1, Y1)
Coordinates of the last point. (Xn, Yn)
Distance between machining operations. (I)
2) Coordinates of the starting point. (X1, Y1)
Coordinates of the last point. (Xn, Yn)
Number of points to machine. (N)
3) Coordinates of the starting point. (X1, Y1)
Inclination angle. (

)
Distance to travel. (L)
Distance between machining operations. (I)
4) Coordinates of the starting point. (X1, Y1)
Inclination angle. (

)
Distance to travel. (L)
Number of points to machine. (N)
5) Coordinates of the starting point. (X1, Y1)
Inclination angle. (

)
Number of points to machine. (N)
Distance between machining operations. (I)