Fagor 8055i FL EN, Operating Manual

Page: 102 / 160

·102·
Operating manual
CNC 8055
CNC 8055i
3.
WORKING
WITH OPERATIONS OR
CYCLES
·MC· O
PTION
S
OFT
: V02.2
X
Rectang
ular and
ci
rcu
lar pocket cycl
es
Milling pass (

). Finishing stock on the side walls (

) and at the bottom (

z). Number
of finishing passes (N).
Place the cursor in the window for the finishing operation, key in the desired value and press
[ENTER].
Sideways penetration angle (

,

).
In the rectangular pocket, the penetration is carried out from the pocket center following the first
machining path. The path is followed as many times as needed so it ends back in the center of the
pocket.
In the circular pocket, the penetration is carried out from the pocket center following a helical path
with a radius equal to that of the tool and keeping the machining direction. The penetration (in feed)
always ends in the center of the pocket.
Place the cursor in the corresponding window, roughing or finishing operation, key in the desired
value and press [ENTER].