Fagor 8055i FL EN, Operating Manual

Page: 81 / 160

Operating manual
CNC 8055
CNC 8055i
WORKING
WITH OPERATIONS OR
CYCLES
3.
·MC· O
PTION
S
OFT
: V02.2
X
·81·
Profile
mil
ling
o
peratio
n
Machining conditions in Z (Zs, Z, P, I, Fz).
The machining conditions are defined one by one.
• The Zs and Z values are defined as the coordinates of the first and last points.
• To define the rest of the values (P, I, Fz), go to the corresponding window, key in the desired value
and press [ENTER].
If the penetration step is programmed with a positive sign (I+), the cycle recalculates the step
so all the penetrations are identical, this being equal to or less than the one programmed. If
programmed with a negative sign (I-), the cycle is machined with the given pass (step) except
the last pass that machines the rest.
Milling with or without tool radius compensation.
To select the type of corner, place the cursor over this icon and press the two-color key.
Without tool radius Compensation.
With left-hand tool radius compensation.
With right-hand tool radius compensation.