VACON NX QUICK HELP
Start-up wizard
The Start Up Wizard is activated when the power to the drive is turned on for the first time, or if the
Start Up Wizard is activated from the System menu (P6.5.3) AND the power is turned OFF and back
ON.
The Start-up Wizard is a feature on the control keypad to facilitate the commissioning of the fre-
quency converter. If selected active (default), the Start-up Wizard prompts the operator for the lan-
guage and application of his/her choice plus for the values for a set of parameters common to all
applications as well as for a set of application-dependent parameters.
Always accept the value with the
Enter button
, scroll options or change values with the
Browser
buttons
(up and down arrows). More information on the use of the control panel in Chapter 7 of the
User's Manual.
enter
Basic application:
I/O reference (P2.14)
Standard application:
I/O reference (P2.1.11)
Local/Remote control
application:
I/O reference A (P2.1.11)
I/O reference B (P2.1.12)
Multi-step speed
application:
I/O reference (P2.1.11)
PID control application:
Act value 1 selection (P2.2.9)
PID controller ref (P2.1.11)
Multi-purpose control
application:
I/O reference (P2.1.11)
Pump and fan control
application:
Act value 1 select (P2.2.1.9)
PID controller ref (P2.1.11)
No. of aux pumps (P2.9.1)
enter
enter
enter
enter
Nine parameter settings
are prompted for each
application:
Min Frequency
0.00 Hz
Additional parameter settings are prompted
depending on the selected application.
Repeat setup?
<No
Yes>
Application
Standard
Setup starts
Press enter
Language
English
Startup wizard
Press enter