Fagor 8055i FL EN, Operating Manual

Page: 72 / 160

·72·
Operating manual
CNC 8055
CNC 8055i
3.
WORKING
WITH OPERATIONS OR
CYCLES
·MC· O
PTION
S
OFT
: V02.2
X
Some cycles may be carried out in the tool position or may be associated a multiple positioning so
the cycle may be repeated in several locations. The positioning moves may be selected with each
one of the following keys:
It is possible to combine ISO-coded blocks with standard and/or user cycles to create part-programs.
Chapter
"5 Saving programs" describes in detail how to do it and how to use those programs.
To de-select a cycle and return to the standard screen, press the key for the selected cycle (the one
with the lamp on) or the [ESC] key.
Multiple positioning in several locations.
Multiple positioning in a straight line.
Multiple positioning in an arc.
Multiple positioning in a rectangular pattern.
Multiple positioning in a grid pattern.
When operating in conversational mode, do not use global parameters 150 through 299 (both
included), because the operations or cycles can modify these parameters and cause the machine to
malfunction.