Fagor 8055i FL EN, Operating Manual

Page: 49 / 160

Operating manual
CNC 8055
CNC 8055i
O
PERATING
IN JO
G MODE
2.
·MC· O
PTION
S
OFT
: V02.2
X
·49·
Tool
con
tro
l
2.6 Tool control
The standard screen of the MC mode offers the following tool data.
This window displays the following information:
• In large characters, the tool "T" number currently selected.
• The "D" offset number associated with the tool.
• The position values of the tool change point. The CNC does not show this window when text
47 of program 999997 has not been defined.
To select another tool, follow these steps:
1. Press the [T] key.
The CNC highlights the tool number.
2. Key in the number of the tool to be selected.
To quit the preset selection mode, press [ESC].
3. Press [START] for the CNC to select the new tool.
The CNC will manage the tool change.