Fagor 8055i FL EN, Operating Manual

Page: 123 / 160

Operating manual
CNC 8055
CNC 8055i
WORKING
WITH OPERATIONS OR
CYCLES
3.
·MC· O
PTION
S
OFT
: V02.2
X
·123·
Multip
le positio
nin
g
Multiple positioning in an arc (level 2).
The following data must be defined:
• Center coordinates (Xc, Yc).
• The starting point in Polar coordinates; Radius (R) and angle (

).
2 of the following data must be defined. When defining all 3 of them (if they are other than 0), the
cycle assumes the (N) and (

) values.
(N) Number of points to machine.
(

) Angular distance between machining operations.
(

) Angle of the last point.
Data definition.
The coordinates are defined one by one. After placing the cursor on the coordinates of the axes to
be defined, the value is entered in one of the following ways.
• Entering the value manually. Key in the desired value and press [ENTER].
• Assign the current machine position.
Jog the axis with the handwheel or the JOG keys up to the desired point. Press [RECALL] so
the selected data assumes the value shown in the top right window and press [ENTER].
The top right window shows the tool position at all times.
To define the rest of the values (R, N,

,

,

), go to the corresponding window, key in the desired
value and press [ENTER].