Fagor 8055i FL EN, Operating Manual

Page: 105 / 160

Operating manual
CNC 8055
CNC 8055i
WORKING
WITH OPERATIONS OR
CYCLES
3.
·MC· O
PTION
S
OFT
: V02.2
X
·105·
Boring
o
peratio
n
3.9 Boring operation
Boring operation (level 1).
The following data must be defined:
• The machining point (X, Y), the coordinate of the safety plane (Zs), the coordinate of the part
surface (Z), the total machining depth (P) and the dwell at the bottom (t).
Boring operation (level 2).
This level is only available when using spindle orientation. This level may be used, after the quail
has penetrated, to orient the spindle, retract the quail before the exit movement, thus preventing the
part from scratching.
The following data must be defined:
• The machining point (X, Y), the coordinate of the safety plane (Zs), the coordinate of the part
surface (Z), the total machining depth (P) and the dwell at the bottom (t) and the data for quail
orientation and retraction (

s,

x,

y).
This key accesses the boring operations.