Fagor 8055i FL EN, Operating Manual

Page: 155 / 160

Operating manual
CNC 8055
CNC 8055i
EXECUTION AND SIMULATION
6.
·MC· O
PTION
S
OFT
: V02.2
X
·155·
Graphi
c rep
resentatio
n
Every time a new display area is selected, the CNC keeps the current graphic representation. It does
not delete it.
Graphic parameters
• Simulation speed.
Select on the top right side of the screen the percentage of simulation speed to be applied.
Use the [

][

] keys to select the percentage and press [ENTER] for the CNC to assume that
value.
• Tool path colors.
It only makes sense in line graphics (not in solid ones). It lets you choose the colors to represent
rapid traverse, the tool path without compensation, the tool path with compensation and
threading.
Use the [

][

] keys to select, on the right side of the screen, the type of path and use the s [

][

]
keys to select the color to be applied.
Press [ENTER] for the CNC to assume those values.
• Colors of solid.
It only makes sense in solid graphics (not in line graphics). It lets you use the colors to represent
the cutter, the part, the axes and the clamps.
Use the [

][

] keys to select, on the right side of the screen, the type of path and use the [

][

]
keys to select the color to be applied.
Press [ENTER] for the CNC to assume those values.
Clear screen
When selecting this option, the CNC clears the screen and shows the axes or the part unmachined.
Starting graphic simulation
During graphic simulation, the CNC takes into account the simulation speed and the position of the
feedrate override switch (FEED 0%-120%).
When selecting a new simulation speed, the CNC applies 100% of it regardless of the position of
the switch. Once the switch is turned, the CNC begins to apply the selected %.
To interrupt the simulation, press [STOP].
When pressing [START] to resume or re-start the execution or simulation, it deletes the
current graphic representation and starts a new one with the new values.
The zoom function cannot be used while executing or simulating the part. If it is, interrupt
the execution or simulation by pressing the [STOP] key.
The screen cannot be cleared while executing or simulating the part. If it is, interrupt the
simulation by pressing the [STOP] key.
Once the type of graphics, the display area, the graphic parameters, etc have been
selected, press the [START] key to start graphic simulation.
To quit the simulation mode, press either [GRAPHICS] or [ESC].