Fagor 8055i FL EN, Operating Manual

Page: 79 / 160

Operating manual
CNC 8055
CNC 8055i
WORKING
WITH OPERATIONS OR
CYCLES
3.
·MC· O
PTION
S
OFT
: V02.2
X
·79·
Profile
mil
ling
o
peratio
n
3.3 Profile milling operation
This cycle may be defined in two ways:
Level 1.
The following data must be defined:
• The starting point (X1, Y1), the intermediate points (P1 through P12), the last point (Xn, Yn) and
the machining conditions in Z (Zs, Z, P, I, Fz).
• Also, in the area for roughing operation data, it must be defined whether the milling operation
is carried out with or without tool compensation.
Level 2.
The following data must be defined:
• The starting point (X, Y), the "Profile program" number and the machining conditions in Z (Zs,
Z, P, I, Fz).
• Also, in the area for roughing operation data, it must be defined whether the milling operation
is carried out with or without tool compensation.
This key accesses the profile milling operation.