Fagor 8055i FL EN, Operating Manual

Page: 130 / 160

·130·
Operating manual
CNC 8055
CNC 8055i
4.
OP
ERAT
ING IN
IS
O MODE
·MC· O
PTION
S
OFT
: V02.2
X
P
rogramming assistance
4.2.4 Mirror image
4.2.5 Scaling factor
4.2.6 Coordinate rotation
The icons may be used to select the following options:
• Select the action to be carried out. It is possible to cancel the
active mirror image, define a new one canceling the previous
ones or define a new one and add it to the one that is currently
active.
• Select the axes on which mirror image is applied. For a new
mirror image, you may select between the X, Y or X-Y axes. For
an additive mirror image, you may select between the X and Y
axes. This icon is not shown when selecting mirror image
cancellation.
The cycle internally generates an ISO block that contains a
combination of functions G10, G11 and G12.
An icon is used to indicate whether to cancel the existing scaling
factor or activate a new one. In the latter case, a numeric field is
displayed to define the value of the scaling factor.
The cycle internally generates a block with function G72.
An icon is used to select the action to be carried out. It is possible
to cancel the active coordinate rotation, define a new one canceling
the previous one or define a new one adding it to the one currently
active.
To define or activate a coordinate rotation, it shows three numeric
fields to edit the angle and the center of rotation.
The cycle internally generates two blocks with function G73.