Fagor 8025 T CNC, Operating Manual

Page: 50 / 309

8025/8030 CNC OPERATING MANUAL 25
3.3.7. Creation of a program
Same as section 3.6.7. in EDITING mode (6) except that the block may be executed before
pressing ENTER. To do this:
- Press . The CNC executes the block.
- If it is correct, it may be recorded in memory by pressing ENTER.
- If it is incorrect, press DELETE.
- Rewrite the block.
Atention:
On pressing , the CNC executes the block and the display mode
changes to AUTOMATIC mode.
By pressing ENTER or DELETE the display returns to the TEACH-IN
display mode.
When the blocks are executed, the CNC retains the sequence of the completed
blocks.
Radius compensation cannot be performed in this mode.
If a subroutine is called, the CNC will execute all its blocks.
3.3.8. Deletion of a block
Same as in EDITING mode (6).
3.3.9. Copy a program.
Same as in EDITING mode (6).