Fagor 8025 T CNC, Operating Manual

Page: 198 / 309

84 8025/8030 CNC PROGRAMMING MANUAL
Let us suppose that the tool used for this cycle has known dimensions and a location code
of F3 and the probe is a square of 40 mm on each side.
Machine-parameter P902 = P90 - 40
Machine-parameter P903 = P90
Machine-parameter P904 = P92 - 40
Machine-parameter P905 = P92
To run the probing cycles N2, N3, N4, and N5 described next, a probe will be used placed
on the tool turret. The probe must be previously calibrated, by means of N0 probing cycle,
for example, and its dimensions entered in the pertinent tool table.
X - Length in the X axis.
Z - Length in the Z axis.
F - Location code.
R - Radius of the probe’s tip (ball).
The location code to be entered in the tool table will depend on which sides were used to
calibrate the probe.