Fagor 8025 T CNC, Operating Manual

Page: 126 / 309

12 8025/8030 CNC PROGRAMMING MANUAL
6.2.2. G01. Linear interpolation
The movements programmed after G01 are performed in a straight line at the feedrate F
programmed.
When two or three axes move simultaneously, the resulting path is a straight line between
the initial point and the final point. The machine moves along that path at the programmed
feedrate F.
The CNC calculates the feedrates of each axis so that the feedrate of the resulting path is
the programmed F.
Example:
Programming the X axis in diameters. Initial point X40 Z50.
N100 G90 G01 X60 Z10 F300
The knob on the front panel of the CNC can be used to vary the programmed feedrate F
between 0% and 120% or between 0% and 100%, according to parameter P600(3).
If, during a G01 movement, the key is pressed, the movement will be performed at
twice the programmed feedrate if P600(3) is zero.
Function G01 is modal and incompatible with G00,G02,G03 and G33.
Function G01 can be programmed as G1.
When the CNC is turned on, after executing M02/M30, after an EMERGENCY or after
a RESET, the CNC assumes the G01 code.