Fagor 8025 T CNC, Operating Manual

Page: 64 / 309

8025/8030 CNC OPERATING MANUAL 39
3.6. MODE 6: EDITING
This is the fundamental operating mode for programming the CNC. In this mode
programs, subroutines as well as separate blocks may be written, amended and deleted.
The method of working in this operating mode is as follows:
3.6.1. Selection of the EDITOR (6) operating mode
- Press OP MODE
- Press key 6
The meaning of the function keys to operate in the MODE will appear on the screen.
3.6.2. Locking/Unlocking of memory
- Press [LOCK/UNLOCK MEMORY]. CODE appears on the screen:
- Key in: MKAI1 to lock the memory.
MKAI0 to unlock the memory.
- Press ENTER.
Atention:
a) In the event of keying in any code other than those indicated, when
pressing ENTER, the said code will be erased, with the CNC waiting
for the correct code.
b) Locking the memory implies not being able to alter the programs, but
they can be displayed.