88
8025/8030 CNC PROGRAMMING MANUAL
N4. PART MEASUREMENT AND TOOL CALIBRATION CYCLE FOR THE X AXIS
Cycle programming format:
G75 N4 P1= K— P2= K— P3=K— P4= K— P5= K— P6=K—
G75 N4
= Part measurement and tool calibration cycle code for the X axis.
P1
= Theoretical X value.
P2
= Theoretical Z value.
P3
= Safety distance (in radius).
P4
= Probing feedrate.
P5
= Tolerance (in radius).
P6
= Corrector number for the tool to be calibrated.
With this cycle, besides doing everything described before for the part measurement cycle
for the X axis (N2), The CNC will correct the I value of the corrector number specified by
P6.
This correction will only take place when the measurement error (P93/2) is equal to or
greater than the tolerance specified by P5.
N5. PART MEASUREMENT AND TOOL CALIBRATION CYCLE FOR THE Z AXIS
Cycle programming format:
G75 N5 P1=K— P2=K— P3=K— P4=K— P5=K— P6=K—
G75 N5
= Part measurement and tool calibration cycle code for the Z axis.
P1
= Theoretical X value.
P2
= Theoretical Z value.
P3
= Safety distance.
P4
= Probing feedrate.
P5
= Tolerance.
P6
= Corrector number for the tool to be calibrated.
With this cycle, besides doing everything described before for the part measurement cycle
for the Z axis (N3), The CNC will correct the K value of the corrector number specified
by P6.
This correction will only take place when the measurement error (P95) is equal to or
greater than the tolerance specified by P5.
Summary of Contents for 8025 T CNC
