Fagor 8025 T CNC, Operating Manual

Page: 69 / 309

44 8025/8030 CNC OPERATING MANUAL
3.6.7.2. Modification and deletion of a block
I) During the writing process
a) Modification of characters
If during the writing of a block a character already written has to be modified:
- Use the keys to place the cursor on the character to be modified or
deleted.
- To modify, simply key in the new character. To delete, press the CL key.
- If DELETE is pressed, the characters to the right of the cursor will be deleted.
b) Insertion of characters
If during the writing of a block a character has to be inserted within that block:
- Use the keys to place the cursor at the point where the new character
is to be inserted.
- Press INS. The portion of the block that follows the cursor starts blinking.
- Key in the new characters required.
- Press INS. The blinking stops.
II) Block already entered in memory
a) Modification and insertion of characters
- Key in the block number concerned.
- Press RECALL. The block appears at the bottom of the screen.
- Proceed as in the previous item.
- Press ENTER. The modified block is put into the memory.
b) Deletion of the block
- Key in the block number
- Press DELETE.
. If during the programming of a block the CNC fails to respond to any key pressed, it
means that there is something incorrect in what is being entered.