Fagor 8025 T CNC, Operating Manual

Page: 123 / 309

8025/8030 CNC PROGRAMMING MANUAL 9
(Modal) G33 : Threadcutting
G36 : Automatic radius blend (controlled corner rounding)
G37 : Tangential approach
G38 : Tangential exit
G39 : Chamfering
(Modal) G40* : Cancellation of radius compensation
(Modal) G41 : Left hand radius compensation
(Modal) G42 : Right hand radius compensation
(Modal) G47 : Single block treatment
(Modal) G48* : Cancellation of single block treatment
G50 : Loading of the values in the tool offset table
G51 : Correction of the dimensions of the tool in use
G52 : Communication with FAGOR LOCAL AREA NETWORK
(Modal) G53-G59 : Zero offsets
G64 : Multiple arc pattern machining cycle
G65 : Independent axis execution
G66 : Pattern repeat (roughing canned cycle following part shape)
G68 : Roughing canned cycle (X)
G69 : Roughing canned cycle (Z)
(Modal) G70 : Programming in inches
(Modal) G71 : Programming in millimeters
(Modal) G72 : Scaling factor
G74 : Automatic search for machine reference
G75 : Probing
G75 N2 : Probing canned cycles
G76
: Automatic block generation
G81 : Canned turning cycle with straight sections
G82 : Canned facing cycle with straight sections
G83 : Deep hole drilling
G84 : Turning with arcs
G85 : Facing with arcs
G86 : Longitudinal threadcutting cycle
G87 : Face threadcutting cycle
G88 : Grooving cycle (X)
G89 : Grooving cycle (Z)
(Modal) G90* : Programming of absolute coordinates
(Modal) G91 : Programming of incremental coordinates
G92 : Preselection of coordinates and setting of max. S value
G93 : Preselection of polar origin
(Modal) G94 : Feedrate F in mm/min (inch/min.)
(Modal) G95* : Feedrate F in mm/rev (inch/rev.)
(Modal) G96 : Speed S in m/min (feet/min.) (Constant surface speed)
(Modal) G97* : Speed S in rev/min.