Electro-Metrics EM-2115, Instruction Manual

Page: 154 / 278

EM-2115 APPENDIX D BROADBAND CORRECTION FACTORS
(EM2110D-1)
APPENDIX D
BROADBAND CORRECTION FACTORS
FOR
ELECTRO-METRICS MODEL EM-2115 (EMC-30)
SERIAL NO: TYPICAL
RF BAND NO: FREQUENCY
RANGE
10 kHz1
BANDWIDTH 100 kHz1
BANDWIDTH 1 MHz1
BANDWIDTH
1 9-35 kHz +41 xxxx xxxx
2 35-75 kHz +39 xxxx xxxx
3 70-150 kHz +40 xxxx xxxx
4 120-250 kHz +39 xxxx xxxx
5 250-500 kHz +40 xxxx xxxx
6 0.5-1.1 MHz +40 xxxx xxxx
7 1.1-2.4 MHz +40 xxxx xxxx
8 2.4-5.5 MHz xxxx +21 xxxx
9 5.5-12.5 MHz xxxx +21 xxxx
10 12.5-30 MHz xxxx +20 xxxx
11 25-50 MHz xxxx xxxx +1
12 50-100 MHz xxxx xxxx +1
13 100-200 MHz xxxx xxxx +4
14 200-500 MHz xxxx xxxx +4
15 500-1000 MHz xxxx xxxx +4
NOTE: 1. Widest available bandwidth for the frequency range noted.
Add the correction factor given for the frequency range in use to the front panel digital
meter indication, in dB(µV), to obtain the broadband signal level in dB(µV/MHz). The broad-
band signal amplitude level accuracy will be ±2.0 dB using the above chart factors.
QUALITY ASSURANCE: .