Electro-Metrics EM-2115, Instruction Manual

Page: 14 / 278

ELECTRO-METRICS EM-2115 0.1 INSTALLATION
(EM2115-0.1-ii)
4) One (1) 6-32 X 3/8.
5) One (1) 4-40 X 3/8.
NOTE: The left-hand slide mounting assembly contains a notch
in the front bracket for the RF Input Cable.
g. Install the slide assemblies to each side of the unit using six (6) 8-32 X 1/4
screws.
h. The unit is now ready for installation into a console or rack containing a
slide-mounting assembly.
i. To remove slide mounts and install handles, reverse the procedure given
above.
0.1.2.1 Rack Mounting, Environmental Considerations
When operating the EM-2110 as part of a rack-mounted system, either open or
enclosed, always provide sufficient cooling air to keep the operating temperature of the
EM-2110 from exceeding 30°C-35°C (86°F-95°F).