Electro-Metrics EM-2115, Instruction Manual

Page: 22 / 278

ELECTRO-METRICS EM-2115 1.0 INTRODUCTION/SPECIFICATIONS
(EM2115S1-8)
TABLE 1.2
RECEIVER SENSITIVITY1 VS BANDWIDTH2
RF FREQ.
RANGE SENS.
@ BW
200 Hz
SENS.
@ BW
1 kHz
SENS.
@ BW
10 kHz
SENS.
@ BW
100 kHz
SENS.
@ BW
1 MHz
SENS.
@ BW
WB3
(1) 9-35
kHz
-35 -28 -18 ------------ ------------ +30
(2) 35-75
kHz
-37 -30 -20 ------------ ------------ +28
(3) 70-150
kHz
-37 -30 -20 ------------ ------------ +28
(4) 120-250
kHz
-37 --30 -20 ------------ ------------ +28
(5) 250-500
kHz
-37 -30 -20 ------------ ------------ +28
(6) 0.5-1.1
MHz
-37 -30 -20 ------------ ------------ +28
(7) 1.1-2.4
MHz
-37 -30 -20 ------------ ------------ +28
(8) 2.4-5.5
MHz
------------ -30 -20 -10 ------------ +20
(9) 5.5-12.5
MHz
------------ -30 -20 -10 ------------ +20
(10) 12.5-30
MHz
------------ -30 -20 -10 ------------ +20
(11) 25-50
MHz
------------ ------------ -13 -4 +6 +18
(12) 50-100
MHz
------------ ------------ -12 -2 +8 +20
(13) 100-
200 MHz
------------ ------------ -12 -2 +8 +20
(14) 200-
500 MHz
------------ ------------ -10 0 +10 +22
(15) 0.5-1.0
GHz
------------ ------------ -6 +4 +14 +28
NOTES: 1. Signal equals noise, dB(

V). Narrowband sensitivities based
on average detector and broadband sensitivities based on peak
detector.
2. 6 dB bandwidth ±10%.
3. Impulse sensitivity of widest available bandwidth in each
frequency range in dB(µV)/MHz.