Electro-Metrics EM-2115, Instruction Manual

Page: 5 / 278

ELECTRO-METRICS EM-2115 TABLE OF CONTENTS
(EM2115-0.1-ii)
TABLE OF CONTENTS
SECTION
TITLE PAGE
2.5.5
EM-2115 Device Dependent Commands S2-23
2.5.6 Frequency Tuning S2-25
2.5.7 Amplitude And Frequency Read S2-25
2.5.8 Computer Software Available for EM-2115 S2-26
2.6 External X-Y Recorder Operation S2-26
2.6.1 EM-2115/X-Y Recorder Calibration S2-26
2.6.2 EM-2115/X-Y Recorder Operation S2-27
2.7 External Oscilloscope Operation S2-29
2.7.1 EM-2115 Oscilloscope Output Connectors S2-29
2.7.2 EM-2115/Oscilloscope Operation S2-30
III
Performance Check S3-1
3.1 Introduction S3-1
3.2 When To Use Test Procedures S3-1
3.3 Preliminary S3-1
3.3.1 Precautions S3-1
3.3.2 Control Settings S3-2
3.3.3 Frequency Check Points S3-2
3.3.4 Signal Amplitude And Frequency Accuracy S3-3
3.4 Performance Test Procedures S3-3
3.4.1 CW Voltage Accuracy S3-3
3.4.2 Broadband Voltage Accuracy S3-4
3.4.3 Frequency Accuracy S3-5
3.4.4 Attenuator Accuracy S3-6
3.4.5 CW Sensitivity S3-7
3.4.6 Impulse Sensitivity S3-8
3.4.7 Bandwidth (3 dB) S3-9
3.4.8 Image Rejection S3-10
3.4.9 IF Rejection S3-12
3.4.10 Spurious Response S3-12
IV
Service, Maintenance, And Calibration S4-1
4.1 Precautions S4-1
4.2 Instrument Access/Disassembly/Assembly S4-2
4.2.1 Top/Bottom Cover Removal S4-2
4.2.1.1 Top Cover Removal S4-2
4.2.1.2 Bottom Cover Removal S4-2
4.2.2 RF Tuner Assembly (A2) Removal S4-2
4.2.2.1 RF Tuner Top Cover Removal S4-3
4.2.3 Submodule Assembly Removal S4-4
4.2.3.1 Submoduel Assembly Disassembly/Assembly S4-5
4.2.4 Front Panel Assembly (A1) Removal S4-5
4.2.5 Prescaler Module (A12) Removal S4-6
4.2.6 Power Supply Assembly (A14) Removal S4-6
4.3 Preliminary S4-7
4.3.1 Work Conditions S4-7
4.3.2 Control Settings S4-7
4.4 Calibration/Alignment Procedures S4-8