manualshive.com logo in svg

Electro Industries/GaugeTech Shark 100T, Installation & Operation Manual, Page: 85 / 322

Share
Download
Electro Industries/GaugeTech Shark 100T Installation & Operation Manual Download Page 85

     

Doc

#    

E154713     

                              

              4-13

4: Electrical Installation

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

4.5.5.2: D2 High-Voltage Power Supply

1. For the D2 Option power supply:

1. Connect the line supply wire to the L+ terminal. 

2. Connect the neutral supply wire to the N- terminal.

3. Connect earth ground to the PE GND terminal. 

Use a 4 Amp Slo-Blo fuse on the power supply, for example, UL approved Littelfuse 
part number FLQ4.

1. Connect Line
    Supply Wire 
    to L(+).

2. Connect 
    Neutral  
    Supply Wire 
    to N(-).

3. Connect earth
     ground to 
     PE GND.

Summary of Contents for Shark 100T



































































































































































































































































































































Reviews:

No comments