manualshive.com logo in svg

Electro Industries/GaugeTech Shark 100T, Installation & Operation Manual, Page: 114 / 322

Share
Download
Electro Industries/GaugeTech Shark 100T Installation & Operation Manual Download Page 114

     

Doc

#    

E154713     

                              

              6-6

6: Using the Touch Screen Display

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

CF S.M.A.R.T. Tool

The Nexus® 1500+ meter uses an Industrial
grade, specialized compact flash disk drive. 
This drive has many features not found in 
commercial flash. One of these features is 
the S.M.A.R.T. tool. This tool provides user 
accessed diagnostics on the health of the 
drive. 
This screen displays compact flash 
S.M.A.R.T. (Self-Monitoring, Analysis, and 
Reporting Technology) tool information. The S.M.A.R.T. tool must be supported and 
enabled to contain valid data. The screen displays the following information:

•  Compact flash model number

•  Compact flash serial number

•  Compact flash size in bytes

•  Type of compact flash (Regular/S.M.A.R.T.)

•  Status of S.M.A.R.T. feature (Supported/Not Supported, Enabled/Disabled) 

•  Status of S.M.A.R.T. data (Valid/Invalid)

•  S.M.A.R.T. Revision code

•  S.M.A.R.T. Firmware version and date code

•  S.M.A.R.T. number of Initial Invalid blocks, number of bad Run Time blocks,

number of Spare blocks (decimal)

•  S.M.A.R.T. number of child pairs (decimal)

•  Compact flash type (SLC)

•  Compact flash specification’s maximum erase count (100000 if flash is SLC; 5000 if 

flash is MLC)

•  Compact flash’s average erase count 

•  Compact flash remaining % of life (100 - "Average erase count"*100/"Flash spec 

max erase count")

This diagnostic information lets the user know when the drive may wear out and need 
to be replaced or the meter be de-commissioned.

Summary of Contents for Shark 100T



































































































































































































































































































































Reviews:

No comments