manualshive.com logo in svg

Electro Industries/GaugeTech Shark 100T, Installation & Operation Manual, Page: 115 / 322

Share
Download
Electro Industries/GaugeTech Shark 100T Installation & Operation Manual Download Page 115

     

Doc

#    

E154713     

                              

              6-7

6: Using the Touch Screen Display

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

IEC 61850

The IEC 61850 screen contains infor-
mation about the IEC 61850 Protocol 
Ethernet Network server, including any 
system or error messages. It displays:

•  Server state: server port, interface

•  Server Initialization time in seconds

•  Memory statistics

•  SCL parsing messages

•  Stack indications

•  Stack messages

Task Info

The Task Info screen contains infor-
mation about free stack size based on 
the tasks in the processing stack. This 
information is only useful for trouble-
shooting or de-bugging purposes.

Summary of Contents for Shark 100T



































































































































































































































































































































Reviews:

No comments