manualshive.com logo in svg

Electro Industries/GaugeTech Shark 100T, Installation & Operation Manual, Page: 286 / 322

Share
Download
Electro Industries/GaugeTech Shark 100T Installation & Operation Manual Download Page 286

     

Doc

#    

E154713     

                              

             D-6

                                                          D: Using SNMP

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

•  SNMP Group - provides SNMP statistics as well as capability to enable SNMP 

Traps.

•  Transmission Group - provides device driver statistics for RS232 and Ethernet.

D.3.2: PDUs

PDUs, also referred to as “packets,” belong to one of two categories: PDUs sent from 
the SNMP manager to the meter, and PDUs sent from the meter to the SNMP man-
ager.

•  PDUs sent from the SNMP manager to the meter are:

•   GetMessage (Message ID 0) - this retrieves the objects specified by the OIDs in 

the message.

•  GetNextRequest (Message ID 1) - this retrieves objects which are next in lexical 

order in the MIB, to the objects specified by the OID in the message.

•  GetBulkRequest (Message ID 5) - this retrieves a large number of objects speci-

fied by the OID in the message.

•  SetRequest (Message ID 3) - this message modifies internal meter data specified 

by an OID and value in the message.

•  PDUs sent from the meter to the SNMP manager are:

•  Response (Message ID 2) - this sends values in response to a GetRequest, Get-

NextRequest, GetBulkRequest, or SetRequest command.

•  Trap (Message ID 4) - this is sent in response to predefined events (see D.3.3: 

Traps, on page D-7).

Summary of Contents for Shark 100T



































































































































































































































































































































Reviews:

No comments