manualshive.com logo in svg

Electro Industries/GaugeTech Shark 100T, Installation & Operation Manual, Page: 134 / 322

Share
Download
Electro Industries/GaugeTech Shark 100T Installation & Operation Manual Download Page 134

     

Doc

#    

E154713     

                              

              6-26

6: Using the Touch Screen Display

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

•  Network: click the 

Radio Button

 

next to Network 1 or Network 2.

•  IP address

•  Subnet mask

•  Default gateway

•  MAC address

Touch 

Next/Prev

 to go to the Display 

Setting/Serial Setting screens.

Digital Inputs:

This screen displays the status of the meter’s digital inputs: the eight built-in digital 
inputs or the digital inputs from an installed Option board. The meter supports up to 2 
optional digital input boards (each with 16 status inputs), in addition to the built-in 
inputs.

•  Inputs - 01 - 16 

•  Name - the name configured for the 

input

•  State - the input’s state, e.g., Open 

or Closed. The State names are 
configured in the meter’s Device 
Profile settings - see Chapter 11 in 

the 

Communicator EXT

TM

 4.0 and 

MeterManager EXT Software User 
Manual

, for instructions.

•  Slots - Select Slot 3, Slot 4, or Built In to see the digital inputs for those options. 

Note that you will only see the buttons for slots 3 and 4 if there is a digital input 
board installed in that slot.

Summary of Contents for Shark 100T



































































































































































































































































































































Reviews:

No comments