manualshive.com logo in svg

Electro Industries/GaugeTech Shark 100T, Installation & Operation Manual, Page: 149 / 322

Share
Download
Electro Industries/GaugeTech Shark 100T Installation & Operation Manual Download Page 149

     

Doc

#    

E154713     

                              

               8-3

8: Time-of-Use Function

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

8.2: The Nexus® 1500+ Meter's TOU Profile

A Nexus® 1500+ meter’s TOU profile sets the parameters for TOU data accumulation 
into rate bins. Features of the meter’s TOU implementation include:

•  The meter uses a perpetual TOU scheme, so you only need to set up the TOU 

profile once and then you can apply it to all subsequent years. 

•  You can save the TOU profile as a file and easily import it into any other Nexus® 

1500+ meters that you have. 

•  You can set up to 16 daily schedules, e.g., Weekday, Weekend, or Holiday, or any 

type of daily schedule you need. 

•  You can set up to four Season types, which can also be customized as daily or 

weekly schedules.

•  You can set up to 12 Month types.

•  Season and month end time can be customized as needed.

•  The meter has 38 available accumulators for TOU; 16 accumulators can be tracked 

in a TOU profile.

8.3: TOU Prior Season and Month

The Nexus® 1500+ meter stores accumulations for the prior season and the prior 
month. When the end of a billing period is reached, the current season or month is 
stored as the prior data. The registers are then cleared and accumulations resume, 
using the next set of TOU schedules and register assignments from the TOU profile. 
Prior and current accumulations to date are always available. 

8.4: Updating, Retrieving and Replacing the TOU Profile

Communicator EXT

TM

 software retrieves the TOU Profile from the Nexus® 1500+ 

meter or from the computer's hard drive for review and edit. Accumulations do not 
stop during TOU profile updates, but once you have made your changes and updated 
the meter, the meter performs a self-read and the current month and season data 
blocks are moved to the prior data blocks, and the current data blocks and all accu-

mulator “buckets” are cleared. See Chapter 15 of the 

Communicator EXT

TM

 4.0 and 

MeterManager EXT Software User Manual

 for instructions on updating the TOU profile.

Summary of Contents for Shark 100T



































































































































































































































































































































Reviews:

No comments