manualshive.com logo in svg

Electro Industries/GaugeTech Shark 100T, Installation & Operation Manual, Page: 305 / 322

Share
Download
Electro Industries/GaugeTech Shark 100T Installation & Operation Manual Download Page 305

     

Doc

#    

E154713     

                              

             D-25

                                                          D: Using SNMP

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

D.6.3.2: Retrieving Traps

1. Click the Traps tab. Any traps sent to the device’s IP address are displayed. 

2. Click on a trap to view details about the trap, which are displayed in the Trap Info 

box in the lower right of the screen.

NOTE: 

If traps are enabled in only one card, the traps will be sent out over that one 

card. If both cards are enabled, then traps will be sent out over either card depending 
upon the trap manager’s IP address. In other words, each trap is sent over a card that 
best matches the traps manager’s IP address and gateway; i.e., the trap will either be 
sent over a card which has the same subnet address as the trap manager; if no card 
is on the same subnet with the trap manager, the trap will be sent over a gateway (if 
one is configured).

Summary of Contents for Shark 100T



































































































































































































































































































































Reviews:

No comments