manualshive.com logo in svg

Electro Industries/GaugeTech Shark 100T, Installation & Operation Manual, Page: 299 / 322

Share
Download
Electro Industries/GaugeTech Shark 100T Installation & Operation Manual Download Page 299

     

Doc

#    

E154713     

                              

             D-19

                                                          D: Using SNMP

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

7. You can copy the MIBs mentioned earlier in this section into the directory that the 

SNMP manager application (in this example, SnmpB) uses, or you can set up a 
directory for the MIB files in this way:

a. Click Options in the SnmpB tool bar.

b. Click the Preference box in the pull-down menu.

c. Click Modules in the box on the left side and click Add.

d. Type in your new path in one of the “type new path here” lines. An example path 

is shown in the above screen.

10. Click OK.

example path

Summary of Contents for Shark 100T



































































































































































































































































































































Reviews:

No comments