manualshive.com logo in svg

Electro Industries/GaugeTech Shark 100T, Installation & Operation Manual, Page: 218 / 322

Share
Download
Electro Industries/GaugeTech Shark 100T Installation & Operation Manual Download Page 218

     

Doc

#    

E154713     

                              

               12-2

12: Test Mode

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro 

Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

The Nexus® 1500+ meter’s Test Mode implementation has a security feature which 
allows you to block Test Mode access for one or both of the Ethernet ports, if neces-
sary.

12.1.1: LED Pulse Outputs and Test Mode

The Nexus® 1500+ meter provides 2 LED pulse outputs (KYZ outputs 1 and 2), which 
in Normal Mode can be enabled and programmed to send a light pulse with a certain 
width every time a certain amount of a energy has been accumulated. For Test Mode 
use, the LEDs are set up as shown on the following table. The energy source used for 
each LED constitutes a unique Test Mode operation.

There are four available Test Modes, as shown in the table below. The default Test 
Mode is 1.

*These are the default values for these fields - they cannot be changed. If the Mode, 
Form, and Pulse Width have been set to different values in the meter’s Device Profile, 
those settings are ignored for Test Mode, and the values in the table are used. 

**If LED pulse output is disabled in the device profile, factor settings default to 1.8 
Wh per pulse (for WYE systems) and 1.2 Wh per pulse (for DELTA systems) for Class 
20 units and 0.36 Wh per pulse (for WYE systems) and 0.24 Wh per pulse (for DELTA 
systems) for Class 2 units.

***The Source can be set either from the Test Mode setting through Communicator 

EXT

TM

 software or through the display.

Test Mode Settings

Test 

Mode

Mode*

Form*

Pulse Width 

(msec)*

Factor (Wh per pulse)**

              Source***

LED 1

LED2

1

Always 
enabled*

Pulse (FORM 
A)*

100*

as programmed in device 
profile**

+Wh Q14

+VARh Q12

2

Always 
enabled*

Pulse (FORM 
A)*

100*

as programmed in device 
profile**

+Wh Q14

-VARh Q34

3

Always 
enabled*

Pulse (FORM 
A)

100*

as programmed in device 
profile**

-Wh Q23

+VARh Q12

4

Always 
enabled*

Pulse (FORM 
A)*

100*

as programmed in device 
profile**

-Wh Q23

-VARh Q34

Summary of Contents for Shark 100T



































































































































































































































































































































Reviews:

No comments