Before You Start
XDM-300 Installation and
Maintenance Manual
2-26 ECI
Telecom
Ltd.
Proprietary
417006-2311-0H3-A00
Warning labels for laser products
The following labels are affixed to the shelf front panel. The labels indicate that
the product is classified as a Class 1 Laser Product, Hazard Class 1M.
LASER KLASSE1
CLASS 1 LASER PRODUCT
HAZARD CLASS 1M
LASER RADIATION
WHEN OPEN AVOIO
EXPOSURE TO THE BEAM
Laser safety statutory warning
All personnel involved in equipment installation and maintenance must be
aware that laser radiation is invisible. Therefore, although protective devices
generally prevent direct exposure to the beam, personnel must strictly observe
the applicable safety precautions and in particular must avoid staring into
optical connectors, either directly or using optical instruments.
Laser device operating precautions
In addition to the general precautions described in this section, be sure to
observe the following warnings when operating a product equipped with a laser
device. Failure to observe these warnings could result in fire, bodily injury, and
damage to the equipment.
W
ARNING
:
To reduce the risk of exposure to hazardous
radiation:
When performing maintenance and other activities on
equipment using lasers, it is recommended that you use
protection goggles for the wavelength range of 1300 nm
to 1600 nm.
Only authorized personnel should carry out hot insertion
or swapping of an optical module or optical interface
module.
To prevent irremediable damage to your eyes, avoid
looking into the fiber when hot-removing and/or inserting
a fiber termination.
Place plastic covers on module fiber ports and fiber
terminations which are not currently in use.
Do not operate controls, make adjustments, or perform
procedures associated with the laser device other than
those specified herein.
It is strictly forbidden to interfere with any protective devices
and interlocks that are used to prevent direct exposure to the
laser beam.
Summary of Contents for XDM-300
Page 1: ...XDM 300 Installation and Maintenance Manual Version 7 417006 2311 0H3 A00...
Page 2: ......
Page 8: ......
