XDM-300 Installation and
Maintenance Manual
Equipment
Installation
417006-2311-0H3-A00 ECI
Telecom
Ltd.
Proprietary
3-103
To connect management cables to the XDM-300 shelf
equipped with an ECU300/ECU300-F:
1.
Route the management cables along the side of the rack to the appropriate
XDM-300 shelf (see "
Connecting Fibers and Cables in ETSI A Racks
" on
).
2.
Pull each cable down to the level of the corresponding ECU300/ECU300-F
and bend it until the cable connector is positioned against the appropriate
timing connector on the ECU300/ECU300-F.
3.
Connect the management station cable to the MANAGEMENT MAIN
connector of the first shelf, in accordance with the rack installation plan and
the cable tags.
4.
If more than one shelf is installed, connect a management cable from the
PROT/LCT connector of the first shelf to the MANAGEMENT MAIN
connector of the second shelf, and so on.
5.
Secure each cable connector using its two screws.
C
AUTION
:
Do not exert excessive tightening torque to
secure the cable connector, as this may damage the
ECU300/ECU300-F.
6.
Use cable ties as required to fasten the cables to the shelves.
Tool Kit
ECI Telecom offers a tool kit to facilitate extraction/insertion of connectors and
optical SFP transceivers connected to ports in very high density cabling
environments.
The tool kit is packed in a compact box and enables the technical staff to
handle installation and maintenance activities in a quick and efficient fashion,
without affecting traffic of a neighboring connector that should not be
removed.
The kit includes the following tools:
|
RJ-45 extractor
|
LC connector extraction/insertion and optical SFP extractor (all in the same
tool)
|
DIN 1.0/2.3 (regular and small profile) connector extractor
|
Pincers
Summary of Contents for XDM-300
Page 1: ...XDM 300 Installation and Maintenance Manual Version 7 417006 2311 0H3 A00...
Page 2: ......
Page 8: ......
