Equipment Installation
XDM-300 Installation and
Maintenance Manual
3-56 ECI
Telecom
Ltd.
Proprietary
417006-2311-0H3-A00
4.
Insert the rear end of the ECU300/ECU300-F into the card guides.
5.
Push the ECU300/ECU300-F in until it mates the chassis connectors and
the front of the card is flush with the front of the XDM-300 shelf. If you
feel resistance before the connectors are mated, pull the card out and repeat
the procedure.
6.
Secure the ECU300/ECU300-F in place by tightening the two captive
screws.
MXC300 Card
The XDM-300 shelf always operates as redundant platforms, therefore each
shelf must be equipped with two MXC300 cards installed, one in slot MXC-A
(main card) and one in slot MXC-B (protection card).
Figure
3-39: Installing the MXC300
C
AUTION
:
Before extracting or inserting an MXC300 into
the shelf, release the extractor handles, by pressing the brown
locks outward first, then pull/push both handles
simultaneously. Failure to do so may damage the card.
Summary of Contents for XDM-300
Page 1: ...XDM 300 Installation and Maintenance Manual Version 7 417006 2311 0H3 A00...
Page 2: ......
Page 8: ......
