XDM-300 Installation and
Maintenance Manual
Equipment
Installation
417006-2311-0H3-A00 ECI
Telecom
Ltd.
Proprietary
3-129
5.
Open the two screws securing the protective cover of the TPU/OCU
connector in place (located at the back right corner on the top of the first
TPU/OCU shelf, as shown in the following figure). Remove the cover.
Figure
3-106: Removing the connector cover and fastening bracket from the
first TPU/OCU
6.
Open the six screws securing the fastening bracket to the first TPU/OCU
shelf installed on the expanded XDM-300 (see the previous figure).
7.
Open the two screws fastening the bracket to the rack. Remove the bracket.
8.
Orient the second TPU upside down, on a clean flat surface.
9.
Identify the two threaded holes for the pin guides on the bottom of the
second TPU.
Summary of Contents for XDM-300
Page 1: ...XDM 300 Installation and Maintenance Manual Version 7 417006 2311 0H3 A00...
Page 2: ......
Page 8: ......
