XDM-300 Installation and
Maintenance Manual
Equipment
Installation
417006-2311-0H3-A00 ECI
Telecom
Ltd.
Proprietary
3-57
To install the MXC300 card:
1.
Check that the card has not been physically damaged during shipment, and
that the antistatic protection bag of the original packaging is sealed.
2.
Remove the card from its antistatic protection packaging and perform a
visual inspection to detect damage during shipping. Report any problems.
3.
Record the hardware and software versions indicated on the card’s
identification labels.
4.
Press both brown levers located on the card's extractor handles, to release
the handles.
5.
Simultaneously push both handles forward.
6.
Insert the rear end of the MXC300 card into the card guides.
7.
If the NVM card was not installed in the MXC300, install it as follows:
a.
Check that the NVM card has not been physically damaged during
shipment.
b.
Remove the NVM from its antistatic protection packaging and perform
a visual inspection to detect damage during shipment. Report any
problems.
Figure
3-40: Installing the NVM in the MXC300
Summary of Contents for XDM-300
Page 1: ...XDM 300 Installation and Maintenance Manual Version 7 417006 2311 0H3 A00...
Page 2: ......
Page 8: ......
