XDM-300 Installation and
Maintenance Manual
Equipment
Installation
417006-2311-0H3-A00 ECI
Telecom
Ltd.
Proprietary
3-53
2.
Connect the RAP grounding post to the rack grounding stud.
3.
When NEBS compliance is required, for each XDM-300 shelf installed in
the rack, connect a grounding strap from the two shelf grounding posts to
the RAP grounding post. Note that the grounding strap lug must be inserted
over both grounding posts.
Installing XDM-300 Cards
After the shelf has been installed and grounded, you can install the cards.
Before you start:
When installing cards, make sure to carefully align the card with the shelf
guide rails. Hold the card straight during insertion and removal, and pull or
push it slowly and carefully to avoid touching components located on adjacent
cards/modules.
C
AUTION
:
If you feel resistance when inserting cards, immediately
retract the card and repeat the process.
Do not use excessive torque when tightening the fastening
card screws.
Summary of Contents for XDM-300
Page 1: ...XDM 300 Installation and Maintenance Manual Version 7 417006 2311 0H3 A00...
Page 2: ......
Page 8: ......
