ECI XDM-300, Installation And Maintenance Manual

Page: 91 / 266

XDM-300 Installation and
Maintenance Manual Equipment Installation
417006-2311-0H3-A00 ECI Telecom Ltd. Proprietary 3-33
Installing the Fiber Guide for ETSI A Racks
The fiber guide for ETSI A racks should be installed one mounting hole above
the cable guide in the rack.
To attach the rack mount brackets to the fiber guide:
|
Attach each bracket to the corresponding fiber guide sidewall with the four
screws supplied in the installation kit.
Figure 3-19: Fiber guide for ETSI A racks
To install the fiber guide in the rack:
|
Install the cable guide in the rack one mounting hole above the cable guide
and fasten it to the rack side rails with four screws.
Installing the Cable Slack Tray
The cable slack tray is installed only in horizontal XDM-300 shelf installations
that also have a lower cable guide installed; these usually also include a fiber
guide.
Figure 3-20: Cable slack tray
To install the cable slack tray in the rack:
| Install the cable slack tray in the rack one mounting hole under the fiber
guide and fasten it to the rack side rails with two M6 screws, washers, and
nuts.