Eaton Power Xpert PXM 4000, User And Installation Manual

Page: 90 / 292

Page 82
IM02601004E
www.eaton.
6 Functions on the Web Server Pages
LOCATING CURRENT INFORMATION
From the Meter Home Page, select RMS or Symmetric from the drop-down box beside Current.
Click one of the radio buttons listed below Current to select a specific phase; neutral or ground. The
page will update to display the selection.
To view the trending, waveform, harmonics or phasor graphs, click the drop-down box located on
the top right side of the page and make a selection.
When Trend and Min/Max is selected, the minimum and maximum values are displayed on the bot-
tom, right side of the page with date and time stamps.
When Harmonics is selected, a table is displayed showing the Voltage, Voltage Angle, Current,
Current Angle and the calculated watts (V x I x COS[Angle V - Angle I]).
By default, all the options are selected when the Phasor diagram is selected. You can clear an op-
tion on the left side of the page to remove the correlating point of the phasor diagram.