Eaton Power Xpert PXM 4000 User And Installation Manual Download Page 39

Page: 39 / 292

www.eaton.com

IM02601004E

Page 31

3 Installation

Mounting the Power Xpert Display and Meter as a

Single Unit, Con’t.

1) Place the display module

through the panel cutout.

Using one of the provided

#8-32X1/2 in. screws,

screw the display module

to the panel at the top

center point.

2) Place one of the provided

display P-Back mounting

brackets on the side of the

display module and screw

it into place using the two

provided #8-32X1/2 in.

screws.

Repeat this step to install

the remaining Display P-

Back Mounting Bracket.

Summary of Contents for Power Xpert PXM 4000





































































































































































































































































































Search results

Summary of Contents for Power Xpert PXM 4000

Reviews:

Brands by name

Popular brands

Eaton Power Xpert PXM 4000, User And Installation Manual

Search results

Summary of Contents for Power Xpert PXM 4000

Reviews:

Brands by name

Popular brands