Eaton Power Xpert PXM 4000, User And Installation Manual

Page: 145 / 292

www.eaton.com
IM02601004E
Page 137
8 Setup on the Web Server Pages
PQ INDEX SETUP
The PQ Index page provides the means to rank the importance of the information captured on
the power quality page. This is done by assigning a value from 0 to 50 for Swell, Sag, dv/dt, THD
Voltage, THD Current, and Flicker. For example, if a user does not want the Power Quality page to
recognize Flicker activity, the Flicker percent can be set to 0. Measurements of greater importance
can be assigned higher values accordingly.
Locating PQ Index Setup on the Web
From the Setup Main Page, select Meter Setup & Commissioning from the tree structure on the left
side of the page. The tree structure will expand to list Security, Compensation, Metering, I/O, Clock,
Communications, and System. Click Metering. The tree structure will expand to list Demand, TOU,
Load Profile, and PQ Index. Select PQ Index. The page will update to display the current PQ Index
settings.
Use the Edit button at the bottom of the page to modify the current value settings from 0 to 50. Click
the OK button at the bottom of the page when entries are completed. The default is 10.0.