Eaton Power Xpert PXM 4000, User And Installation Manual

Page: 88 / 292

Page 80
IM02601004E
www.eaton.
6 Functions on the Web Server Pages
LOCATING VOLTAGE INFORMATION
From the Meter Home Page select Line to Line, Line to Neutral, Symmetric or AUX Line to Line
from the drop-down box beside Voltage on the left side of the page. Click one of the radio buttons
below Voltage to select a specific voltage (e.g.: AB, BC, CA, NG, AN, BN, or CN). The page will
update to display the selection.
You can select trending, waveform, harmonics or phasor graphs from the drop-down box near the
top of the page.
When Trend and Min/Max is selected, the minimum and maximum values are displayed with date
and time stamps.
When Harmonics is selected, a table is displayed showing the Voltage, Voltage Angle, Current,
Current Angle and the calculated watts (V x I x COS[Angle V - Angle I]). Note: Watts calculation is
only valid for AN, BN, and CN selections.
By default, the fundamental frequency is displayed. It can be excluded by clearing the Exclude
Fundamental check box on the left side of the page.