Eaton Power Xpert PXM 4000, User And Installation Manual

Page: 147 / 292

www.eaton.com
IM02601004E
Page 139
8 Setup on the Web Server Pages
Watt-Seconds, the primary rated pulse constant equals 1000 Watt-Hours per pulse. The S1 and S2
outputs pulse with a fixed width.
R1, R2, and R3 are form C relays. In case the R1, R2, and R3 pulse constant value entered is
Watt-Hour primary, the pulse output from these relays takes CT and PT ratios into account. R1, R2,
and R3 relays change the state every time the energy value reaches the pulse constant value.
Locating Pulse Initiation Setup on the Web
From the Setup Main Page, select Meter Setup & Commissioning from the tree structure on the left
side of the page. The tree structure will expand to list Security, Compensation, Metering, I/O, Clock,
Communications, and System. Click I/O.
The tree structure will expand to list Pulse Initiation, Internal I/O, and Remote I/O. Select Pulse
Initiation. The page will update to display the current Pulse Initiation settings. Use the Edit button at
the bottom of the page to modify current Pulse Initiation settings.
Use the drop down boxes to select the source of each output and the text boxes beside the source
to enter the pulse constant. Click the OK button at the bottom of the page when entries are com-
pleted.