Eaton Power Xpert PXM 4000, User And Installation Manual

Page: 264 / 292

Page 256
IM02601004E
www.eaton.
F Specifications
Dimensions/Clearances/Weights
Meter
Height: 8.32 inches
Top/Bottom Clearance -3 inches minimum
Clearance required for proper ventilation
Width: 8.2 inches
Side clearance - 2 inches minimum
Clearance required for proper access to termination
Depth: with terminals and panel mounting feet - 6.8 inches
Add 1.2 inch depth clearance for terminal plug field cable termination
Add 3.2 inch depth clearance for RS232 or Fiber Optic
Shipping Weight 7.1 lbs.
Graphical Display
Height:
Frame, 9.02 inches
Body back, 7.22 inches
Leave 2 inch top/bottom clearance for proper ventilation
Width:
Frame, 7.77 inches
Body back, 7.22 inches
Depth:
2.54 inches total
1.4 inches from back of mounting panel back
Assumption panel = .125 in. thickness
1.04 inches from the front of mounting panel to tip of knob.
Shipping Weight: 2.1 lbs.
Electrical Specifications
Display Power Supply Input (DG2)
24 Vdc +/- 10%
8 W maximum draw
Common TVS bonded to ground ~ 300V
Wiring to 4 position removable terminal plug
12-18 AWG, wire ferrules recommended
Meter Power Supply Input
PXMPS-1 Standard (PS1):
100 - 240 Vac +/- 20%, 47 - 63 Hz
110 - 250 Vdc +/- 20%
50W maximum draw
Minimum Ride through 0.5 Sec
Neutral (-) TVS bonded to ground ~ 575V
Wiring to 3 position removable terminal plug
12-18 AWG, wire ferrules recommended
Meter PXMCM 24VDC outputs (CM4, CM6)
24VDC +/-10%
10W maximum load
Output switched off on PS1 power down
Common to paired RS485 port
CM3/CM4
CM5/CM6
Common TVS bonded to ground ~ 300V
Wiring to 3 position removable terminal plug
Specifications, Con’t.