Eaton Power Xpert PXM 4000 User And Installation Manual Download Page 144

Page: 144 / 292

Page 136

IM02601004E

www.eaton.

8 Setup on the Web Server Pages

LOAD PROFILE SETUP

The Load Profile feature allows you to log and view interval values from Real Power (Forward,

Reverse, Net and Sum), Apparent Power , Reactive Power, (Delivered, Received) Net and Sum, as

well as Ampere. You can also set the log interval. The interval is 5 to 60 minutes. The Load Profile

also provides a monthly profile, if enabled.

Locating Load Profile Setup on the Web

From the Setup Main Page, select Meter Setup & Commissioning from the tree structure on the left

side of the page. The tree structure will expand to list Security, Compensation, Metering, I/O, Clock,

Communications, and System. Click Metering. The tree structure will expand to list Demand, TOU,

Load Profile and PQ Index. Select Load Profile. The page will update to display the current Load

Profile Interval minutes and the monthly profile as enabled or disabled.

Use the Edit button at the bottom of the page to modify the current interval and/or the monthly pro-

file setting. When all settings are entered, click the OK button located at the top of the page.

Summary of Contents for Power Xpert PXM 4000





































































































































































































































































































Search results

Summary of Contents for Power Xpert PXM 4000

Reviews:

Related manuals for Power Xpert PXM 4000

Brands by name

Popular brands

Eaton Power Xpert PXM 4000, User And Installation Manual

Search results

Summary of Contents for Power Xpert PXM 4000

Reviews:

Related manuals for Power Xpert PXM 4000

Brands by name

Popular brands