manualshive.com logo in svg

Eaton Power Xpert PXM 4000, User And Installation Manual

Share
Download
Eaton Power Xpert PXM 4000 User And Installation Manual Download Page 166

Page 158 

IM02601004E

 

                          

www.eaton.

9 Setup on the Graphical Display 

9.1. Log In

Text can be entered in upper case and lower case. Grammatical marks are available as well as 

delete (Del) and enter (Ent 

↵

). 

The Power Xpert is programmed from the factory with a user/password combination of upper case 

X for both the user and the password. 
To log in:

1. Press the navigation dial to select the upper field and rotate the navigation dial  counter-clock 

wise until the upper case X is displayed. 
2. Press the dial to select this character. Rotate the dial clock wise until the Enter symbol (Ent 

↵

) is 

highlighted. 
3. Press the dial to enter the upper case X for the user name. 

4. Rotate the dial to select the password field. 

5. Repeat the process to select the upper case X for the password. 
This will complete the login procedure.

MeterNine

Meter

Power

Quality

Events

Setup

OK

Cancel

MeterNine

View Setup                              

Edit Setup                              

Login       

                     

Logout                            

X

Summary of Contents for Power Xpert PXM 4000





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands