manualshive.com logo in svg

Eaton Power Xpert PXM 4000, User And Installation Manual

Share
Download
Eaton Power Xpert PXM 4000 User And Installation Manual Download Page 136

Page 128 

IM02601004E

 

                          

www.eaton.

8 Setup on the Web Server Pages 

ITIC SETUP 

ITIC Triggers are fixed triggers. Event triggers are dependent on levels of sag and swell conditions. 

You can select Capture Waveform, Capture Parameters, or choose to have an email sent when the 

event occurs. 

Locating ITIC Setup On The Web

From the Setup Main Page, select Triggers from the tree structure on the left side of the page. The 

tree structure will expand to list Out of Limits, Demand Overload, ITIC, Fast Transient, and Tran-

sient. Click ITIC. The structure will expand to list the main ITIC categories; Voltage Line - Line and 

Voltage Line - Neutral. Click the category to view or edit. 
The page will update to list all the current settings for the selected trigger. Use the Edit button at 

the bottom of the page to edit settings. When Edit is selected, the page will display check boxes for 

modifying current settings. 

Summary of Contents for Power Xpert PXM 4000





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands